Series 5000/6000 Utility Controller

UtC Series 5000/6000
Shop Controller



The 5000 / 6000 Series Shop Controllers can be utilized to control multiple utility services, gas and electrical convenience outlets that are commonly used in either educational, research or medical facilities.  The 5000 / 6000 Series Controllers are standard fitted from 4 – 9 output circuits depending upon the project requirements.  Units can be custom expanded to up to twenty (20) outputs.  This series of the Utility Controller is also ideally suited for use in the shop classrooms to activate such devices as table saws, grinders, and other power tools in the classroom.

Custom Applications:

ISIMET will custom build E-Series Enclosures to specific project requirements, providing multiple electrical contactors. Square D Type DPA Contacts up to 60 Amp are utilized in these applications.

Other Uses for the Utility Controller

Woodworking and Automotive Shops The Shop Controller can restrict access to electric and pneumatic power tools and machines that are the most frequent causes of student injury when used without instructor supervision.  The safety features of the Utility Controller permit the instructor to activate only those power tools that are intended for use during the class period.

 

Research and Medical Facilities – The 5000 / 6000 Series Shop Controller can be utilized to control multiple utility services, gases and electrical convenience outlets that are commonly used in either an educational, research or medical facility.  Access to a service can be master controlled at the point of origin or each outlet or device can be individually controlled.   As many as twenty separate utilities or devices can be controlled by a single Shop Controller.  A secondary pre-packaged relay is used to interface with the controlled utility or device.  Pre-assembled enclosures to house the remote relays and/or solenoids are also available and are custom assembled per each specific project specifications.


 

ISIMET UtC 5000-6000 Utility Controller

Product Description
The 5000-6000 Series Shop Controller can be utilized to control multiple utility services, gas and electrical convenience outlets that are commonly used in either educational, research or medical facilities.  The 5000-6000 Series Controllers are standard fitted from 4 – 9 output circuits depending upon the project requirements.  Units can be custom expanded to up to twenty (20) outputs.  This series of the Utility Controller is also ideally suited for use in the shop classrooms to activate such devices as table saws, grinders, and other power tools in the classroom.

Enclosure Specifications
Control Panel - 16 gauge white powder coated sheet metal or Stainless Steel
Wall Box Enclosure – 16 gauge gray powder coated sheet metal or Stainless Steel
Wall Box Dimensions - 16” High x 14” Wide x 6” Deep (Up to 6 Circuits)
                                    18” High x 18” Wide x 6” Deep (7-9 Circuits)
                                    24” High x 24” Wide x 6” Deep (Greater than 9 Circuits) 

NOTE: 4” deep enclosure available for most applications.

Available Integration Inputs and Outputs

Dry-Contact

24 VAC/DC

Remote Panic Input

X

 

Alarm Input

 

X

Isolated Panic Input

 

X

Energy Management / Building Automation Input

 

X

*Panic Output – 24 VAC Only

X

X

 

 













*Panic Output may also be configured for dual dry-contact

Description

Rating

120 VAC Supply Required

15 Amp

24 VAC Transformer

3-6 Amp

24 VAC Circuit Outputs

1.5 Amp Max

120 VAC Panel Fuse

5-10 Amp

24 VAC PCB Fuse 1

3 Amp

3 VDC PCB Fuse 3

500 mAmp

 

















Typical Controlled Services:  Electrical, Domestic Water, Fuel Gas and Exhaust Fan.

Optional Controlled Services:  De-Ionized Water, Compressed Air, Vacuum, Oxygen, Acetylene, Argon, Hydrogen, Helium and Fume Hoods.


 


 

Enclosure Specifications and Dimensions:

The 5000 / 6000 Series Enclosure thru 6 circuits is 16 X 14 X 6 plus 0.625” door flange, for units 7 thru 9 circuits is an 18 X 18 X 6 enclosure.  Custom fabrications are available to provide greater than 9 circuits within a 24 X 24 X 6 enclosure.  Flush Trim adds 3.5 inches to both height and width Wall Surface dimensions.  The NEMA 1 enclosures may be either surface or flush mounted.  Labeling on the Shop Controller door panel is customized to the specific purpose.


 

ISIMET Utility Controllers and Companion Enclosures
Two Hour Fire Rating

UL Test #1479

All ISIMET Utility Controllers, Enclosures and Accessories can be certified for two-hour fire rating.  Working closely with the industry leader in fire rated materials, ISIMET can offer our enclosures with a one-half inch fire rated blanket.  This blanket that is adhered to the outer surface of the enclosure will enable the installer to incorporate the ISIMET product into a fire rated wall without the need for additional blanket or other rated material.

To specify a unit as “Fire Rated” use the following nomenclature:

Add to the ISIMET Part Number:  Prefix “F2” for all Utility Controllers, Companion Enclosures and Accessories.  Model numbers are for example only.

UtC-F2-12X9 indicates a four-circuit Utility Controller with fire blanket.

LA-F2-1212 indicates a wall mounted LA Series with fire blanket.

FLA-F2-2235 indicates a wall mounted FLA Series with fire blanket.

E-F2-1212 indicates a twelve-circuit E-Series with fire blanket.

S-F2-1211-3-3/4-K indicates a three-station S-Series with fire blanket.

MLA-F2-1-B indicates a Monitoring Beacon with fire blanket.

All components utilized in this “Fire Rating” will be provided with additional instructions for installation in order to insure that the rated material and process is not violated or damaged during installation.  Fire caulking as well as foil tape and extra blanket material is included for all components except for accessories.  Accessories are provided with foil tap and extra blanket only.  Fire caulking will need to be field provided.  Enclosure Sizes limited to 24” X 24” X 8” and smaller.








Fire Rating Field Instructions